u-blox EVK-ODIN-W2

Hardware

Platform ST STM32: The STM32 family of 32-bit Flash MCUs based on the ARM Cortex-M processor is designed to offer new degrees of freedom to MCU users. It offers a 32-bit product range that combines very high performance, real-time capabilities, digital signal processing, and low-power, low-voltage operation, while maintaining full integration and ease of development.

Microcontroller

STM32F439ZIY6

Frequency

168MHz

Flash

2MB

RAM

256KB

Vendor

u-blox

Configuration

Please use ublox_evk_odin_w2 ID for board option in “platformio.ini” (Project Configuration File):

[env:ublox_evk_odin_w2]
platform = ststm32
board = ublox_evk_odin_w2

You can override default u-blox EVK-ODIN-W2 settings per build environment using board_*** option, where *** is a JSON object path from board manifest ublox_evk_odin_w2.json. For example, board_build.mcu, board_build.f_cpu, etc.

[env:ublox_evk_odin_w2]
platform = ststm32
board = ublox_evk_odin_w2

; change microcontroller
board_build.mcu = stm32f439ziy6

; change MCU frequency
board_build.f_cpu = 168000000L

Uploading

u-blox EVK-ODIN-W2 supports the following uploading protocols:

  • blackmagic

  • cmsis-dap

  • jlink

  • stlink

Default protocol is stlink

You can change upload protocol using upload_protocol option:

[env:ublox_evk_odin_w2]
platform = ststm32
board = ublox_evk_odin_w2

upload_protocol = stlink

Debugging

Debugging - “1-click” solution for debugging with a zero configuration.

Warning

You will need to install debug tool drivers depending on your system. Please click on compatible debug tool below for the further instructions and configuration information.

You can switch between debugging Tools & Debug Probes using debug_tool option in “platformio.ini” (Project Configuration File).

u-blox EVK-ODIN-W2 does not have on-board debug probe and IS NOT READY for debugging. You will need to use/buy one of external probe listed below.

Compatible Tools

On-board

Default

Black Magic Probe

Yes

CMSIS-DAP

J-LINK

ST-LINK

Frameworks

Name

Description

STM32Cube

STM32Cube embedded software libraries, including: The HAL hardware abstraction layer, enabling portability between different STM32 devices via standardized API calls; The Low-Layer (LL) APIs, a light-weight, optimized, expert oriented set of APIs designed for both performance and runtime efficiency