Armstrap Eagle 512

Hardware

Platform ST STM32: The STM32 family of 32-bit Flash MCUs based on the ARM Cortex-M processor is designed to offer new degrees of freedom to MCU users. It offers a 32-bit product range that combines very high performance, real-time capabilities, digital signal processing, and low-power, low-voltage operation, while maintaining full integration and ease of development.

Microcontroller

STM32F407VET6

Frequency

168MHz

Flash

512KB

RAM

192KB

Vendor

Armstrap

Configuration

Please use armstrap_eagle512 ID for board option in “platformio.ini” (Project Configuration File):

[env:armstrap_eagle512]
platform = ststm32
board = armstrap_eagle512

You can override default Armstrap Eagle 512 settings per build environment using board_*** option, where *** is a JSON object path from board manifest armstrap_eagle512.json. For example, board_build.mcu, board_build.f_cpu, etc.

[env:armstrap_eagle512]
platform = ststm32
board = armstrap_eagle512

; change microcontroller
board_build.mcu = stm32f407vet6

; change MCU frequency
board_build.f_cpu = 168000000L

Uploading

Armstrap Eagle 512 supports the following uploading protocols:

  • blackmagic

  • cmsis-dap

  • jlink

  • stlink

Default protocol is blackmagic

You can change upload protocol using upload_protocol option:

[env:armstrap_eagle512]
platform = ststm32
board = armstrap_eagle512

upload_protocol = blackmagic

Debugging

Debugging - “1-click” solution for debugging with a zero configuration.

Warning

You will need to install debug tool drivers depending on your system. Please click on compatible debug tool below for the further instructions and configuration information.

You can switch between debugging Tools & Debug Probes using debug_tool option in “platformio.ini” (Project Configuration File).

Armstrap Eagle 512 has on-board debug probe and IS READY for debugging. You don’t need to use/buy external debug probe.

Compatible Tools

On-board

Default

Black Magic Probe

Yes

Yes

CMSIS-DAP

J-LINK

ST-LINK

Frameworks

Name

Description

CMSIS

Vendor-independent hardware abstraction layer for the Cortex-M processor series

Open-source ARM Cortex-M microcontroller library

The libopencm3 project aims to create an open-source firmware library for various ARM Cortex-M microcontrollers.

Standard Peripheral Library

Standard Peripheral Library for ST STM32 microcontrollers

STM32Cube

STM32Cube embedded software libraries, including: The HAL hardware abstraction layer, enabling portability between different STM32 devices via standardized API calls; The Low-Layer (LL) APIs, a light-weight, optimized, expert oriented set of APIs designed for both performance and runtime efficiency