Renesas RA
- Registry:
https://registry.platformio.org/platforms/platformio/renesas-ra
- Configuration:
platform =
platformio/renesas-ra
Renesas Advanced (RA) 32-bit microcontrollers with the Arm Cortex-M33, -M23 and -M4 processor cores deliver key advantages compared to competitive Arm Cortex-M MCUs by providing stronger embedded security, superior CoreMark performance and ultra-low power operation.
For more detailed information please visit vendor site.
Examples
Examples are listed from Renesas RA development platform repository:
Debugging
Debugging - “1-click” solution for debugging with a zero configuration.
Tools & Debug Probes
Supported debugging tools are listed in “Debug” column. For more detailed information, please scroll table by horizontal. You can switch between debugging Tools & Debug Probes using debug_tool option in “platformio.ini” (Project Configuration File).
Warning
You will need to install debug tool drivers depending on your system. Please click on compatible debug tool below for the further instructions.
External Debug Tools
Boards listed below are compatible with Debugging but DEPEND ON external debug probe. They ARE NOT READY for debugging. Please click on board name for the further details.
Name |
MCU |
Frequency |
Flash |
RAM |
---|---|---|---|---|
R7FA6M5BH2CBG |
200MHz |
2MB |
511.35KB |
|
RA4M1 |
48MHz |
256KB |
32KB |
|
RA4M1 |
48MHz |
256KB |
32KB |
Stable and upstream versions
You can switch between stable releases of Renesas RA development platform and the latest upstream version using platform option in “platformio.ini” (Project Configuration File) as described below.
Stable
; Latest stable version, NOT recommended
; Pin the version as shown below
[env:latest_stable]
platform = renesas-ra
board = ...
; Specific version
[env:custom_stable]
platform = renesas-ra@x.y.z
board = ...
Upstream
[env:upstream_develop]
platform = https://github.com/platformio/platform-renesas-ra.git
board = ...
Packages
Name |
Description |
---|---|
Arduino Wiring-based Framework for Renesas MCUs (Portenta core) |
|
Arduino Wiring-based Framework for Renesas MCUs (UNOR4 core) |
|
Renesas FSP CMSIS module for Renesas RA MCU family |
|
The Renesas Flexible Software Package (FSP) is an enhanced software package designed to provide easy-to-use, scalable, high-quality software for embedded system designs using Renesas RA family of Arm Microcontrollers. |
|
Basic Open Source SAM-BA Application (BOSSA) |
|
Device Firmware Upgrade Utilities |
|
Software and Documentation Pack for SEGGER J-Link debug probes |
|
Open On-Chip Debugger. Free and Open On-Chip Debugging, In-System Programming and Boundary-Scan Testing |
|
GNU toolchain for Arm Cortex-M and Cortex-R processors |
Warning
Linux Users:
Install “udev” rules 99-platformio-udev.rules
Raspberry Pi users, please read this article Enable serial port on Raspberry Pi.
Windows Users:
Please check that you have a correctly installed USB driver from board manufacturer
Frameworks
Name |
Description |
---|---|
Arduino Wiring-based Framework allows writing cross-platform software to control devices attached to a wide range of Arduino boards to create all kinds of creative coding, interactive objects, spaces or physical experiences. |
|
Vendor-independent hardware abstraction layer for the Cortex-M processor series |
|
The Renesas Flexible Software Package (FSP) is an enhanced software package designed to provide easy-to-use, scalable, high-quality software for embedded system designs using Renesas RA family of Arm Microcontrollers. |
Boards
Note
You can list pre-configured boards by pio boards command
For more detailed
board
information please scroll the tables below by horizontally.
Arduino
Name |
Debug |
MCU |
Frequency |
Flash |
RAM |
---|---|---|---|---|---|
External |
R7FA6M5BH2CBG |
200MHz |
2MB |
511.35KB |
|
External |
RA4M1 |
48MHz |
256KB |
32KB |
|
External |
RA4M1 |
48MHz |
256KB |
32KB |