The STM8 is an 8-bit microcontroller family by STMicroelectronics an extended variant of the ST7 microcontroller architecture. STM8 microcontrollers are particularly low cost for a full-featured 8-bit microcontroller.
For more detailed information please visit vendor site.
Examples are listed from ST STM8 development platform repository:
Debugging - “1-click” solution for debugging with a zero configuration.
Supported debugging tools are listed in “Debug” column. For more detailed information, please scroll table by horizontal. You can switch between debugging Tools & Debug Probes using debug_tool option in “platformio.ini” (Project Configuration File).
You will need to install debug tool drivers depending on your system. Please click on compatible debug tool below for the further instructions.
Boards listed below have on-board debug probe and ARE READY for debugging! You do not need to use/buy external debug probe.
Boards listed below are compatible with Debugging but DEPEND ON external debug probe. They ARE NOT READY for debugging. Please click on board name for the further details.
|ST STM8S003F3 chip||STM8S003F3P6||16MHz||8KB||1KB|
|ST STM8S103F3 Breakout Board||STM8S103F3P6||16MHz||8KB||1KB|
|ST STM8S105K4T6 Breakout Board||STM8S105K4T6||16MHz||16KB||2KB|
|sduino MB (STM8S208MBT6B)||STM8S208MBT6||16MHz||128KB||6KB|
|sduino UNO (STM8S105K6)||STM8S105K6T6||16MHz||32KB||2KB|
; Latest stable version [env:latest_stable] platform = ststm8 board = ... ; Custom stable version [env:custom_stable] platform = firstname.lastname@example.org board = ...
[env:upstream_develop] platform = https://github.com/platformio/platform-ststm8.git board = ...
|framework-arduinoststm8||An Arduino-like programming API for the STM8 microcontrollers|
|framework-ststm8spl||Standard peripheral library for ST STM8S/A microcontrollers|
|tool-openocd||Open On-Chip Debugger. Free and Open On-Chip Debugging, In-System Programming and Boundary-Scan Testing|
|tool-stm8binutils||STM8 toolchain with GDB debugger|
|tool-stm8flash||stm8flash is an application for programing stm8 devices with SWIM/stlinkv(1,2).|
|tool-stm8gal||stm8gal is an application for programming or reading out STM8 memory using the built-in ROM bootloader (BSL) via UART or SPI interface|
|toolchain-sdcc||Small Device C compiler suite|
|Arduino||Arduino Wiring-based Framework allows writing cross-platform software to control devices attached to a wide range of Arduino boards to create all kinds of creative coding, interactive objects, spaces or physical experiences|
|Standard Peripheral Library||The ST Standard Peripheral Library provides a set of functions for handling the peripherals on the STM32 family of microcontrollers.|
|ST STM8S003F3 chip||External||STM8S003F3P6||16MHz||8KB||1KB|
|ST STM8S103F3 Breakout Board||External||STM8S103F3P6||16MHz||8KB||1KB|
|ST STM8S105K4T6 Breakout Board||External||STM8S105K4T6||16MHz||16KB||2KB|