NUCLEO-8S207K8

Hardware

Platform ST STM8: The STM8 is an 8-bit microcontroller family by STMicroelectronics an extended variant of the ST7 microcontroller architecture. STM8 microcontrollers are particularly low cost for a full-featured 8-bit microcontroller.

Microcontroller STM8S207K8T6
Frequency 16MHz
Flash 64KB
RAM 6KB
Vendor STMicroelectronics

Configuration

Please use nucleo_8s207k8 ID for board option in “platformio.ini” (Project Configuration File):

[env:nucleo_8s207k8]
platform = ststm8
board = nucleo_8s207k8

You can override default NUCLEO-8S207K8 settings per build environment using board_*** option, where *** is a JSON object path from board manifest nucleo_8s207k8.json. For example, board_build.mcu, board_build.f_cpu, etc.

[env:nucleo_8s207k8]
platform = ststm8
board = nucleo_8s207k8

; change microcontroller
board_build.mcu = stm8s207k8t6

; change MCU frequency
board_build.f_cpu = 16000000L

Uploading

NUCLEO-8S207K8 supports the next uploading protocols:

  • serial
  • stlinkv21

Default protocol is stlinkv21

You can change upload protocol using upload_protocol option:

[env:nucleo_8s207k8]
platform = ststm8
board = nucleo_8s207k8

upload_protocol = stlinkv21

Debugging

Debugging - “1-click” solution for debugging with a zero configuration.

Warning

You will need to install debug tool drivers depending on your system. Please click on compatible debug tool below for the further instructions and configuration information.

You can switch between debugging Tools & Debug Probes using debug_tool option in “platformio.ini” (Project Configuration File).

NUCLEO-8S207K8 has on-board debug probe and IS READY for debugging. You don’t need to use/buy external debug probe.

Compatible Tools On-board Default
ST-LINK Yes Yes

Frameworks

Name Description
Standard Peripheral Library The ST Standard Peripheral Library provides a set of functions for handling the peripherals on the STM32 family of microcontrollers.