PULP OS

Configuration

framework = pulp-os

PULP is a silicon-proven Parallel Ultra Low Power platform targeting high energy efficiencies. The platform is organized in clusters of RISC-V cores that share a tightly-coupled data memory

For more detailed information please visit vendor site.

Debugging

Debugging - “1-click” solution for debugging with a zero configuration.

Tools & Debug Probes

Supported debugging tools are listed in “Debug” column. For more detailed information, please scroll table by horizontal. You can switch between debugging Tools & Debug Probes using debug_tool option in “platformio.ini” (Project Configuration File).

Warning

You will need to install debug tool drivers depending on your system. Please click on compatible debug tool below for the further instructions.

On-Board Debug Tools

Boards listed below have on-board debug probe and ARE READY for debugging! You do not need to use/buy external debug probe.

Name

Platform

MCU

Frequency

Flash

RAM

GAPuino GAP8

RISC-V GAP

GAP8

250MHz

64MB

8MB

Platforms

Name

Description

RISC-V GAP

GreenWaves GAP8 IoT application processor enables the cost-effective development, deployment and autonomous operation of intelligent sensing devices that capture, analyze, classify and act on the fusion of rich data sources such as images, sounds or vibrations.

Boards

Note

GreenWaves Technologies

Name

Platform

Debug

MCU

Frequency

Flash

RAM

GAPuino GAP8

RISC-V GAP

On-board

GAP8

250MHz

64MB

8MB