Arduino MKR WAN 1310
Hardware
Platform Atmel SAM: Atmel | SMART offers Flash- based ARM products based on the ARM Cortex-M0+, Cortex-M3 and Cortex-M4 architectures, ranging from 8KB to 2MB of Flash including a rich peripheral and feature mix.
Microcontroller |
SAMD21G18A |
Frequency |
48MHz |
Flash |
256KB |
RAM |
32KB |
Vendor |
Configuration
Please use mkrwan1310 ID for board option in “platformio.ini” (Project Configuration File):
[env:mkrwan1310]
platform = atmelsam
board = mkrwan1310
You can override default Arduino MKR WAN 1310 settings per build environment using
board_*** option, where *** is a JSON object path from
board manifest mkrwan1310.json. For example,
board_build.mcu, board_build.f_cpu, etc.
[env:mkrwan1310]
platform = atmelsam
board = mkrwan1310
; change microcontroller
board_build.mcu = samd21g18a
; change MCU frequency
board_build.f_cpu = 48000000L
Uploading
Arduino MKR WAN 1310 supports the following uploading protocols:
atmel-iceblackmagicjlinksam-ba
Default protocol is sam-ba
You can change upload protocol using upload_protocol option:
[env:mkrwan1310]
platform = atmelsam
board = mkrwan1310
upload_protocol = sam-ba
Debugging
Debugging - “1-click” solution for debugging with a zero configuration.
Warning
You will need to install debug tool drivers depending on your system. Please click on compatible debug tool below for the further instructions and configuration information.
You can switch between debugging Tools & Debug Probes using debug_tool option in “platformio.ini” (Project Configuration File).
Arduino MKR WAN 1310 does not have on-board debug probe and IS NOT READY for debugging. You will need to use/buy one of external probe listed below.
Compatible Tools |
On-board |
Default |
|---|---|---|
Yes |
||
Frameworks
Name |
Description |
|---|---|
Arduino Wiring-based Framework allows writing cross-platform software to control devices attached to a wide range of Arduino boards to create all kinds of creative coding, interactive objects, spaces or physical experiences. |