Artix-7 35T Arty FPGA Evaluation Kit

Hardware

Platform Shakti: Shakti is an open-source initiative by the RISE group at IIT-Madras, which is not only building open source, production grade processors, but also associated components like interconnect fabrics, verification tools, storage controllers, peripheral IPs and SOC tools.

Microcontroller	E-CLASS
Frequency	50MHz
Flash	0B
RAM	128KB
Vendor	Xilinx

Configuration

Please use artix7_35t ID for board option in “platformio.ini” (Project Configuration File):

[env:artix7_35t]
platform = shakti
board = artix7_35t

You can override default Artix-7 35T Arty FPGA Evaluation Kit settings per build environment using board_*** option, where *** is a JSON object path from board manifest artix7_35t.json. For example, board_build.mcu, board_build.f_cpu, etc.

[env:artix7_35t]
platform = shakti
board = artix7_35t

; change microcontroller
board_build.mcu = E-Class

; change MCU frequency
board_build.f_cpu = 50000000L

Uploading

Artix-7 35T Arty FPGA Evaluation Kit supports the following uploading protocols:

• ftdi

• ftdi

• jlink

• jlink

Default protocol is ftdi

You can change upload protocol using upload_protocol option:

[env:artix7_35t]
platform = shakti
board = artix7_35t

upload_protocol = ftdi

Debugging

Debugging - “1-click” solution for debugging with a zero configuration.

Warning

You will need to install debug tool drivers depending on your system. Please click on compatible debug tool below for the further instructions and configuration information.

You can switch between debugging Tools & Debug Probes using debug_tool option in “platformio.ini” (Project Configuration File).

Artix-7 35T Arty FPGA Evaluation Kit has on-board debug probe and IS READY for debugging. You don’t need to use/buy external debug probe.

Compatible Tools	On-board	Default
FTDI Chip	Yes	Yes
J-LINK

Frameworks

Name	Description
Shakti SDK	A software development kit for developing applications on Shakti class of processors