Platform ST STM32: The STM32 family of 32-bit Flash MCUs based on the ARM Cortex-M processor is designed to offer new degrees of freedom to MCU users. It offers a 32-bit product range that combines very high performance, real-time capabilities, digital signal processing, and low-power, low-voltage operation, while maintaining full integration and ease of development.
[env:1bitsy_stm32f415rgt] platform = ststm32 board = 1bitsy_stm32f415rgt
You can override default 1Bitsy settings per build environment using
board_*** option, where
*** is a JSON object path from
board manifest 1bitsy_stm32f415rgt.json. For example,
[env:1bitsy_stm32f415rgt] platform = ststm32 board = 1bitsy_stm32f415rgt ; change microcontroller board_build.mcu = stm32f415rgt ; change MCU frequency board_build.f_cpu = 168000000L
1Bitsy supports the next uploading protocols:
Default protocol is
You can change upload protocol using upload_protocol option:
[env:1bitsy_stm32f415rgt] platform = ststm32 board = 1bitsy_stm32f415rgt upload_protocol = blackmagic
PIO Unified Debugger - “1-click” solution for debugging with a zero configuration.
You will need to install debug tool drivers depending on your system. Please click on compatible debug tool below for the further instructions and configuration information.
1Bitsy does not have on-board debug probe and IS NOT READY for debugging. You will need to use/buy one of external probe listed below.
|Black Magic Probe||Yes|
|CMSIS||The ARM Cortex Microcontroller Software Interface Standard (CMSIS) is a vendor-independent hardware abstraction layer for the Cortex-M processor series and specifies debugger interfaces. The CMSIS enables consistent and simple software interfaces to the processor for interface peripherals, real-time operating systems, and middleware. It simplifies software re-use, reducing the learning curve for new microcontroller developers and cutting the time-to-market for devices|
|STM32Cube||STM32Cube embedded software libraries, including: The HAL hardware abstraction layer, enabling portability between different STM32 devices via standardized API calls; The Low-Layer (LL) APIs, a light-weight, optimized, expert oriented set of APIs designed for both performance and runtime efficiency|
|Standard Peripheral Library||The ST Standard Peripheral Library provides a set of functions for handling the peripherals on the STM32 family of microcontrollers.|
|libopencm3||The libOpenCM3 framework aims to create a free and open-source firmware library for various ARM Cortex-M0(+)/M3/M4 microcontrollers, including ST STM32, Ti Tiva and Stellaris, NXP LPC, Atmel SAM3, Energy Micro EFM32 and others|