Seeed Arch Pro

Hardware

Platform NXP LPC: The NXP LPC is a family of 32-bit microcontroller integrated circuits by NXP Semiconductors. The LPC chips are grouped into related series that are based around the same 32-bit ARM processor core, such as the Cortex-M4F, Cortex-M3, Cortex-M0+, or Cortex-M0. Internally, each microcontroller consists of the processor core, static RAM memory, flash memory, debugging interface, and various peripherals.

Microcontroller	LPC1768
Frequency	96MHz
Flash	512KB
RAM	64KB
Vendor	SeeedStudio

Configuration

Please use seeedArchPro ID for board option in “platformio.ini” (Project Configuration File):

[env:seeedArchPro]
platform = nxplpc
board = seeedArchPro

You can override default Seeed Arch Pro settings per build environment using board_*** option, where *** is a JSON object path from board manifest seeedArchPro.json. For example, board_build.mcu, board_build.f_cpu, etc.

[env:seeedArchPro]
platform = nxplpc
board = seeedArchPro

; change microcontroller
board_build.mcu = lpc1768

; change MCU frequency
board_build.f_cpu = 96000000L

Uploading

Seeed Arch Pro supports the following uploading protocols:

• cmsis-dap

• mbed

Default protocol is mbed

You can change upload protocol using upload_protocol option:

[env:seeedArchPro]
platform = nxplpc
board = seeedArchPro

upload_protocol = mbed

Debugging

Debugging - “1-click” solution for debugging with a zero configuration.

Warning

You will need to install debug tool drivers depending on your system. Please click on compatible debug tool below for the further instructions and configuration information.

You can switch between debugging Tools & Debug Probes using debug_tool option in “platformio.ini” (Project Configuration File).

Seeed Arch Pro has on-board debug probe and IS READY for debugging. You don’t need to use/buy external debug probe.

Compatible Tools	On-board	Default
CMSIS-DAP	Yes	Yes

Frameworks

Name	Description
Mbed	Arm Mbed OS is a platform operating system designed for the internet of things