NXP LPCXpresso54608

Hardware

Platform NXP LPC: The NXP LPC is a family of 32-bit microcontroller integrated circuits by NXP Semiconductors. The LPC chips are grouped into related series that are based around the same 32-bit ARM processor core, such as the Cortex-M4F, Cortex-M3, Cortex-M0+, or Cortex-M0. Internally, each microcontroller consists of the processor core, static RAM memory, flash memory, debugging interface, and various peripherals.

Microcontroller

LPC54608ET512

Frequency

180MHz

Flash

512KB

RAM

200KB

Vendor

NXP

Configuration

Please use lpc546xx ID for board option in “platformio.ini” (Project Configuration File):

[env:lpc546xx]
platform = nxplpc
board = lpc546xx

You can override default NXP LPCXpresso54608 settings per build environment using board_*** option, where *** is a JSON object path from board manifest lpc546xx.json. For example, board_build.mcu, board_build.f_cpu, etc.

[env:lpc546xx]
platform = nxplpc
board = lpc546xx

; change microcontroller
board_build.mcu = lpc54608et512

; change MCU frequency
board_build.f_cpu = 180000000L

Uploading

NXP LPCXpresso54608 supports the following uploading protocols:

  • jlink

  • mbed

Default protocol is mbed

You can change upload protocol using upload_protocol option:

[env:lpc546xx]
platform = nxplpc
board = lpc546xx

upload_protocol = mbed

Debugging

Debugging - “1-click” solution for debugging with a zero configuration.

Warning

You will need to install debug tool drivers depending on your system. Please click on compatible debug tool below for the further instructions and configuration information.

You can switch between debugging Tools & Debug Probes using debug_tool option in “platformio.ini” (Project Configuration File).

NXP LPCXpresso54608 has on-board debug probe and IS READY for debugging. You don’t need to use/buy external debug probe.

Compatible Tools

On-board

Default

J-LINK

Yes

Yes

Frameworks

Name

Description

Mbed OS

Arm Mbed OS is a platform operating system designed for the internet of things