Kendryte K210¶

Configuration:	platform = `kendryte210`

Kendryte K210 is an AI capable RISCV64 dual core SoC, this platform is ported by Sipeed.

For more detailed information please visit vendor site.

Contents

Examples
Debugging
Stable and upstream versions
Packages
Frameworks
Boards

Examples ¶

Examples are listed from Kendryte K210 development platform repository:

Debugging ¶

PIO Unified Debugger - “1-click” solution for debugging with a zero configuration.

Tools & Debug Probes
- On-Board Debug Tools

Supported debugging tools are listed in “Debug” column. For more detailed information, please scroll table by horizontal. You can switch between debugging Tools & Debug Probes using debug_tool option in “platformio.ini” (Project Configuration File).

Warning

You will need to install debug tool drivers depending on your system. Please click on compatible debug tool below for the further instructions.

On-Board Debug Tools ¶

Boards listed below have on-board debug probe and ARE READY for debugging! You do not need to use/buy external debug probe.

Name	MCU	Frequency	Flash	RAM
Sipeed MAIX BiT	K210	400MHz	16MB	6MB
Sipeed MAIX GO	K210	400MHz	16MB	6MB
Sipeed MAIX ONE	K210	400MHz	16MB	6MB

Stable and upstream versions ¶

You can switch between stable releases of Kendryte K210 development platform and the latest upstream version using platform option in “platformio.ini” (Project Configuration File) as described below.

Stable¶

; Latest stable version
[env:latest_stable]
platform = kendryte210
board = ...

; Custom stable version
[env:custom_stable]
platform = [email protected]
board = ...

Upstream¶

[env:upstream_develop]
platform = https://github.com/sipeed/platform-kendryte210.git
board = ...

Packages ¶

Name	Description
framework-kendryte-standalone-sdk	This SDK is for Kendryte K210 without OS support
framework-maixduino	Arduino Wiring-based Framework (K210 Core)
tool-kflash-kendryte210	kflash, A Python-based Kendryte K210 UART ISP Utility
tool-openocd-kendryte210	OpenOCD for RISC-V kendryte 210
toolchain-kendryte210	RISC-V GCC toolchain for Kendryte 210

Warning

Linux Users:

Install “udev” rules 99-platformio-udev.rules

Raspberry Pi users, please read this article Enable serial port on Raspberry Pi.

Windows Users:

Please check that you have a correctly installed USB driver from board manufacturer

Frameworks ¶

Name	Description
Arduino	Arduino Wiring-based Framework allows writing cross-platform software to control devices attached to a wide range of Arduino boards to create all kinds of creative coding, interactive objects, spaces or physical experiences.
Kendryte Standalone SDK	Kendryte Standalone SDK without OS support

Boards ¶

Note

You can list pre-configured boards by platformio boards command or PlatformIO Boards Explorer
For more detailed board information please scroll tables below by horizontal.

Sipeed¶

Name	Debug	MCU	Frequency	Flash	RAM
Sipeed MAIX BiT	On-board	K210	400MHz	16MB	6MB
Sipeed MAIX GO	On-board	K210	400MHz	16MB	6MB
Sipeed MAIX ONE	On-board	K210	400MHz	16MB	6MB